Computer Science

Draw a Circuit for the following input/output table:II.Find The output if:a. A=0, B=1, C=0;b. A=1. B=0 and C=0;c. A=0, B=0 and C=1b. Find the Equivalent Boolean Expression

Assume you are a software engineer and write how this course is a reflection or connection to your work and environment.Assignment:Provide a reflection of at least 750 words (or 2.5 pages double spaced) of how the knowledge, skills, or theories of this course have been applied or could be applied, in a practical manner to your current work environment(My role: Software Engineer). Requirements:• Provide a 750 word (or 2.5 pages double spaced) minimum reflection.• Use of proper APA formatting and citations. If supporting evidence from outside resources is used those must be properly cited. Must have all required APA components: cover sheet, references as needed, and others.• Share a personal connection that identifies specific knowledge and theories from this course.• Demonstrate a connection to your current work environment. If you are not employed, demonstrate a connection to your desired work environment. • You should NOT provide an overview of the assignments assigned in the course. The assignment asks that you reflect on how the knowledge and skills obtained through meeting course objectives were applied or could be applied in the workplace.  

Your Final Project on the surveillance state consists of two parts:1 a Powerpoint presentation consisting of at least 12 slides not including title and references.2. 1000 word research  paper with at least 3 sources.You must include at least 3 quotes from your sources enclosed in quotation marks and cited in-line. There should be no lists – bulleted, numbered or otherwise. Write in essay format with coherent paragraphs not in outline format.Do your own work. Zero points will be awarded if you copy other’s work and do not cite your source or you use word replacement software. 

In this short research paper, you will investigate the evolution of and current trends in improving system performance with concepts such as RISC, pipelining, cache memory, and virtual memory. In this paper you must, as part of your conclusion, explicitly state the concept or approach that seems most important to you and explain your selection.

A minimum of two references is required for this paper. At least one article should be from a peer-reviewed journal.
These are research papers, and should not contain colloquial or slang expressions. Provide a reference list at the end of the paper. Use a minimum of two outside references.
Your paper should be written using APA style. It should be no more than five pages long, but no less than three pages long. The font size should be 12 point, with one-inch margins and double spacing.

You are a new employee at an IT help desk. The organization that you work for has computers that are due for an operating system (OS) upgrade. Your supervisor has provided you with components of the implementation plan to carry out in order to facilitate a smooth upgrade process in each department.
For Milestone One, you will prepare and submit a report modifying the provided JavaScript code to display a new message to the employees when they open their web browser. This will inform them about the operating system upgrade. In your report, describe five components of code, indicating their role in
programming. Identify the specific code to be changed, modify it, and describe the changes, supported by screenshots.
The employees will have their computers upgraded in groups so that all computers are not offline at the same time. Each group will have a date when its upgrade will begin. You will choose a date that is at least 30 days in the future. This will be the initial upgrade date for Group 1. The groups and their corresponding upgrade dates will be assigned as follows:

Group 1: Choose an initial upgrade date that is at least 30 days in the future.
Group 2: This date should be 2 days after the initial upgrade date.
Group 3: This date should be 5 days after the initial upgrade date.
Group 4: This date should be 8 days after the initial upgrade date.
Group 5: This date should be 10 days after the initial upgrade date

For this assignment, you are to take the following code and run it in the script executer
You will type the provided code into the editor. Be sure to focus on syntax, and make sure you have no errors. Once you enter the code, modify the date that the
code is counting down to for each of the five group dates for the upgrade. Take a screenshot of each result after you modify and execute the code.

IN “EXAMPLE 2” TELLS THE 5 COMPONENTS OF CODE.

IM UPLOAD THE PROMPT, THE GRADED RUBRIC FEEDBACK, MY SCREENSHOTS ( I CHANGED THE DATES), THE RUBRIC, AND THE PROMPT

I would like white paper written for below topic for about 10-12 pages which needs to include
Design, diagrams, framwork, citations and the paper needs to be of doctorate level. Plagiarism free.

TOPIC : Automation for business enterprise systems
Enterprise system : Eg : SAP, Oracle, Sales force, Microsoft
1. Introduction
2. Automation – Definition
3. Type of Automation
4. Why is automation trending?
5. How do I initiate Automation?
6. Benefits of automation – cost saving
7. Best practices on automation
8. Standard tools, techniques and frameworks
9. Common mistakes with automation
10 Upcoming trends in automation
11. Conclusion
12. References

Note : The above topic have to be covered any addition to the above is good to have please do not abstain yourself in exploring more

Survey paper on Cyberattacks on the smart grid

• Paper should be one column wide, 4 pages long, in 10-point font, and single spaced.

• Abstract: Provide a summary of the paper and briefly describe the report contribution. The abstract should be representative of the entire paper in 150 to 200 words.
• Introduction: Give the background and motivation for the paper. Provide adequate descriptions and definitions.

• Main Body: List, describe, and compare/contrast the leading work using the uniform survey method/style you defined in the Introduction section. The number of sections and subsections depends on your research areas. You should cover the top work conducted by the leading researchers in the area. You should provide enough detail to orient the reader (who might not be a specialist in the subject under discussion) and establish connections with other results and studies. Make sure that your writing is clear, crisp, and logically organized.

• Limitations, Challenges, and Future Directions: Summarize the limitations of the methods discussed in the main body. Discuss the challenges and suggest some research directions for the reader.

• Conclusion: Summarize your survey by listing the technologies/methods you discussed and create criteria to compare these approaches using a table or figure. Point out not only the advantages of these studied technologies/methods, but also their limitations.

• References: Provide detailed information about the resources that you cite in your paper, following the IEEE format as explained next. All cited papers must be from well-established publishers such as IEEE, Elsevier, Wiley, IET, and Springer.

• Citations and References Format Examples of how to indicate the authors, such as “Laurel and Hardy [2] did this” or “W. E. Coyote [3] did that.” You can also use formats such as “In [4], the authors proposed…” and “The authors of [5] studied…” to refer to your list of authors without repeating the entire citation.

Propose a usability test plan (also known as a usability study and also a usability evaluation) for Zoom, video conferencing tool. The usability evaluation test plan involves proposing a usability test plan that details what and how you would observe three participants to complete tasks with parts or the whole of the interface. If the evaluation is planned and executed effectively according to standard usability testing procedures, the process of the usability evaluation can lead to valuable recommendations for improving the quality of the interface. You will prepare a detailed paper of 15-20 pages (including back matter as needed) that will contain a presentation and discussion of the entire usability evaluation test plan process. This exercise will give you experience of proposing a test plan for assessing user interface design.

Submit a summary (one page or less) within IRBNet describing the project goals. The abstract must:

1) describe the reasons for conducting the proposed project,

2) provide a brief description of the project including objectives, and

3) describe the proposed activities for the project.

Proposal Preparation:

Clear description of the problem to be studied.
Level of review requested (QI, Exempt, Expedited, Full Board)
Projected project timeline (Note: Proposals are approved for one year, so give yourself adequate anticipated time to complete the project).
Succinct background and rationale addressing the problem and the need to conduct the project including references.
Statement of the purpose of the project.
Detailed project methodology: This is often a problem area in student submissions.  Be sure to identify your specific design (e.g. quasi-experimental, cohort model) and describe your intervention in detail (step-by-step).  If, for example, conducting an educational intervention be sure to include a detailed content outline and any handouts as a supplementary submission file. 
Identify your target population for the project. Be sure to include who is eligible to participate (inclusion criteria) and who is not eligible (exclusion criteria).  Describe how subjects will be recruited, what the “subject burden” of participation will be and include any recruitment flyers or announcements that will be used.
Include any and all instruments, surveys, or forms that subjects will be asked to complete. If the instruments are in the public domain and free to use and/or modify, provide documentation of this.  If approval to use or modify is required from the author, you must obtain this in writing and include the approval.  Finally, if instruments are published, include any validity and reliability information available on the instrument(s).

Describe the risks and benefits of the study. All research has “some risk”, though it may be minimal.  For very benign projects, subject burden and possible mild psychological distress from completing instruments should be noted.  If it is possible that more serious distress can occur, you must describe in detail how this will be handled (e.g. debriefing, counseling) and by whom.
Confidentiality must be clearly addressed in the application: Where will subject data be stored?  Who will have access to the data?  Typically, data should be securely stored for 3 years.  If de-identification of subjects is needed, this should be described in detail.  De-identification rosters must also be securely stored but must be kept separate from the data.

Discussion Process Summary(One Page)
As you complete your IRB submissions, tell us about the process. Is it more difficult than you expected? What went more smoothly than you expected? What will you do in the planning stages of future projects to move through the IRB process more effectively?

You are responsible for completing and turning in a research paper on a computer concepts topic that you select and your instructor approves. The paper will include a Title Page, Body, and a Reference Page. The paper will be written in Microsoft Word, double-spaced, using 12-point Arial Font. The paper will have a minimum of 5 complete pages in the body and 3 references. All Research Papers are to follow the APA writing style. Be sure to carefully edit your research paper before submitting. Incorrect spelling, incorrect grammar usage, failure to follow APA format, and general sloppiness will count against your grade (see research paper rubric)