CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study

CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study Permalink: https://nursingpaperessays.com/ ccf-deep-water-h…ation-case-study / ? by Eric Schlosser 11-14 minutes Unformatted Attachment Preview Major Incident Case Response Analysis Part 1 Event Description Review Figure 2.3 on page 33 of the text. Use the “Category” section of the Bow Tie Model pictured to provide a description of the disruption (what was the incident) of the incident you selected. Address this disruption as it relates to the following elements from the model: People, Premises, Processes and Products. (2 to 3 pages) My incident topic that I selected: Deepwater Horizon oil Spill 2012 As the business develops, it is likely to move to a higher return for the same level of risk. This is the growth phase for the business or product. As the investment matures, the reward may remain high, but the risks should reduce. Eventually, an organization will become fully mature and move towards the low-risk and low-return quadrant. The normal expectation in very mature markets is that the organization or product will be in decline. The particular risks that the organization faces will need to be identified by management or by the organization. Appropriate risk management techniques will then need to be applied to the risks that have been identified. The nature of these risk responses and the nature of their impact is considered in Part Four of this book. CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study The above discussion about risk and reward applies to opportunity risks. However, it must always be the case that risk management effort produces rewards. In the case of hazard risks, it is likely that the reward for increased risk management effort will be fewer disruptive events. In the case of project risks, the reward for increased risk management effort will be that the project is more likely to be delivered on time, within budget and to specification/quality. For opportunity risks, the risk versus reward analysis should result in fewer unsuccessful new products and a higher level of profit or (at worst) a lower level of loss for all new activities or new products. In all cases, profit or enhanced level of service is the reward for taking risk. CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study The concept of the risk versus reward analysis in relation to strategic risks is considered in more detail in Figure 15.2. risk versus reward have proved to be a very good decision. In fact, the rain did not start for four or five laps, by which time the driver had been overtaken by most other drivers and his set of wet-weather tyres were ruined in the dry conditions. He had to return to the pits for a further set of new tyres more suited to the race conditions. In this case, a high-risk strategy was adopted in anticipation of significant resulted. Attitudes to risk Different organizations will have different attitudes to risk. Some organizations may be considered to be risk averse, whilst others will be risk aggressive. To some extent, the attitude of the organization to risk will depend on the sector and the nature and maturity of the marketplace within which it operates, as well as the attitude of the individual board members. Risks cannot be considered outside the context that gave rise to them. It may appear that an organization is being risk aggressive, when in fact, the board has decided that there is an opportunity that should not be missed. However, the fact that the opportunity entails high risk may not have been fully considered. One of the major contributions from successful risk management is to ensure that strategic decisions that appear to be high risk are actually taken with all of the information available. Improvement in the robustness of decision-making activities is one of the key benefits of risk management. Attitude to risk is a complex subject and is closely related to the risk appetite of the organization, but they are not the same. Risk attitude indicates the long-term view of the organization to risk and risk appetite indicates the short-term willingness to take risk. This is similar to the dif- ference between the long-term or established attitude of an individual towards the food they eat and their appetite for food at a particular moment in time. Other key factors that will determine the attitude of the organization to risk include the stage in the maturity cycle, as shown in Figure 2.2. For an organization that is in the start-up phase, a more aggressive attitude to risk is required than for an organization that is enjoying growth or one that is a mature organization in a mature marketplace. Where an organization is operating in a mature marketplace and is suffering from decline, the attitude to risk will be much more risk averse. It is because the attitude to risk has to be different when an organization is a startup operation rather than a mature organization, that it is often said that certain highprofile businessmen are very good at entrepreneurial start-up but are not as successful in running mature businesses. Different attitudes to risk are required at different parts of the business maturity cycle shown in Figure 2.2. CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study The referendum in the UK on continued membership of the European Union (EU) in June 2016 resulted in a vote in favour of British exit (Brexit). The UK government has to activate the procedure for the UK to leave the EU. The text box below provides an outline of the most commonly discussed options available to the UK government. Overall, the challenge for the UK government is to ensure the continued success of the UK economy based on a Brexit strategy and tactics that will ensure the continued resilience of the UK. Brexit: what departure options exist for the UK Key benefits for businesses that arise from EU membership include: the existence of a single market: there are no tariffs or other barriers to trade; the freedom to provide services and freedom of establishment; ‘passporting’ that allows financial services to be traded across the EU; visa-free migration of people within the EU; access to EU free-trade agreements with 53 countries around the world. ? to retain. Broadly, there are three models that the UK could target. the norwegian model single market, but must adopt EU standards and regulations and is unable to impose immigration restrictions. Also, Norway must contribute towards the EU budget. the swiss model allows it to access certain selected parts of the Europeanmarket inreturnfor accepting EU legislation in relevant areas as well as making contributions to the EU budget. the Canadian model that has ever been created, and it is possible that the UK could aim to replicate this sort of relationship. Such an agreement might not allow the continued passporting of financial services. All these models struggle to reconcile the central issue of regulatory control. Using and opportunities for business. Risk and triggers Risk is sometimes defined as uncertainty of outcomes. This is a somewhat technical, but nevertheless useful, definition and it is particularly applicable to the management of control risks. Control risks are the most difficult to identify and define, but are often associated with projects. The overall intention of a project is to deliver the desired outcomes on time, within budget and to specification, quality or performance. For example, when a building is being constructed, the nature of the ground conditions may not always be known in detail. As the construction work proceeds, more information will be available about the nature of the conditions. CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study This information may be positive news that the ground is stronger than expected and less foundation work is required. Alternatively, it may be discovered that the ground is contaminated or is weaker than expected or that there are other potentially adverse circumstances, such as archaeological remains being discovered. Given this uncertainty, these risks should be considered to be control risks and the overall management of the project should take account of the uncertainty associated with these different types of risk. It would be unrealistic for the project manager to assume that only adverse aspects of the ground conditions will be discovered. Likewise, it would be unwise for the project manager to assume that conditions will be better than expected, just because s/he wants that to be the case. Because control risks cause uncertainty, it may be considered that an organization will have an aversion to them. Perhaps, the real aversion is to the potential variability in outcomes that then need to be managed. A certain level of deviation from the project plan can be tolerated, but it must not be too great. Tolerance in relation to control risks can be considered to have the same meaning as in the manufacture of engineering components, where the components must be of a certain size, within acceptable tolerance limits. A means of representing the risk management process so that it becomes more accessible to managers and other stakeholders concerned with risk management activities is constantly developing. One of the tools for representing risk management activities that has recently been developed is the bow-tie. CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study The bow-tie as a representation of the risk management process is used several times throughout this book. Figure 2.3 shows a simple representation of the bow-tie applicable to events that can cause disruption to normal efficient operations. FIg URE 2.3 Source Strategic Disruptive events and the bow-tie Category People Premises Impact Financial Products Tactical Infrastructure Disruption Reputational Marketplace The left-hand side of the bow-tie represents the source of a particular hazard and will indicate the classification system used by the organization for sources of risk. In Figure 2.3, these sources of risk used are the high-level sources of strategic, tactical, operational and compliance (STOC) risks. The right-hand side of the bow-tie sets out the impact should the risk events occur, and Figure 2.3 uses the high-level com- ponents of financial, infrastructure, reputational and marketplace (FIRM) impact of a risk materializing. In the centre of the bow-tie is the risk event. Table 3.2 indicates the categories of disruption that can affect organizations, and the same categories of people, premises, processes and products are used here. The purpose of using the bow-tie illustration is to demonstrate the risk classification systems used by the organization and the potential range of impacts should a risk materialize. Controls can be put in place to prevent the event occurring and these can be represented by vertical lines on the left-hand side of the bow-tie. In a similar manner, recovery controls can be represented on the right-hand side of the bow-tie. The bow-tie representation of the risk management process can be used in many ways, including the representation of opportunity risks. Additionally, the bow-tie can be used to illustrate the various types of controls that are available to organizations and this is discussed in more detail in Chapter 13 on loss control. Use of the bow-tie has become widespread, especially in the public sector. The box below provides a practical application of the bow-tie to the identification of preven- tive and response controls related to a fire in the kitchen of a residential risk management and the bow-tie a risk is using a bow-tie. along with the preventive controls to stop the risk occurring. The impact of the risk is also risk should it occur. Response controls Impact Event Smoke Supervision Kitchen fire Fire extinguisher Asset Fire alarm Faulty electrical equipment Preventive controls Maintenance Source of risk Unattended cooking Death … Purchase answer to see full attachment Get a 10 % discount on an order above $ 100 Use the following coupon code : NURSING10

Don't use plagiarized sources. Get Your Custom Essay on
CCF Deep Water Horizon Offshore Oil Drilling Organization Case Study
Get a 15% discount on this Paper
Order Essay
Quality Guaranteed

With us, you are either satisfied 100% or you get your money back-No monkey business

Check Prices
Make an order in advance and get the best price
Pages (550 words)
$0.00
*Price with a welcome 15% discount applied.
Pro tip: If you want to save more money and pay the lowest price, you need to set a more extended deadline.
We know that being a student these days is hard. Because of this, our prices are some of the lowest on the market.

Instead, we offer perks, discounts, and free services to enhance your experience.
Sign up, place your order, and leave the rest to our professional paper writers in less than 2 minutes.
step 1
Upload assignment instructions
Fill out the order form and provide paper details. You can even attach screenshots or add additional instructions later. If something is not clear or missing, the writer will contact you for clarification.
s
Get personalized services with My Paper Support
One writer for all your papers
You can select one writer for all your papers. This option enhances the consistency in the quality of your assignments. Select your preferred writer from the list of writers who have handledf your previous assignments
Same paper from different writers
Are you ordering the same assignment for a friend? You can get the same paper from different writers. The goal is to produce 100% unique and original papers
Copy of sources used
Our homework writers will provide you with copies of sources used on your request. Just add the option when plaing your order
What our partners say about us
We appreciate every review and are always looking for ways to grow. See what other students think about our do my paper service.
Social Work and Human Services
Great Work!
Customer 452587, November 2nd, 2021
Education
Thank you so much
Customer 452631, October 5th, 2021
Technology
Excelled job on the paper!
Customer 452885, December 28th, 2022
Technology
Great job on the paper!
Customer 452885, December 28th, 2022
ENVIRONMENT SCIENCE
great
Customer 452813, June 26th, 2022
Other
Awesome Work!
Customer 452587, February 24th, 2022
Nursing
Great work! I can tell they put great effort in completing this assignment. Thank you.
Customer 452707, October 14th, 2022
Human Resources Management (HRM)
Thank you
Customer 452701, September 15th, 2023
Social Work and Human Services
Awesome, Work! Didn't have to add much to it. Thank You!
Customer 452587, September 7th, 2021
Human Resources Management (HRM)
Thanks for the revision. Your support is greatly appreciated.
Customer 452701, August 27th, 2023
Professions and Applied Sciences
Amazing work!
Customer 452707, May 29th, 2022
Other
AWESOME
Customer 452813, June 25th, 2022
Enjoy affordable prices and lifetime discounts
Use a coupon FIRST15 and enjoy expert help with any task at the most affordable price.
Order Now Order in Chat

We now help with PROCTORED EXAM. Chat with a support agent for more details