[Solved] Selective Repeat Protocol
Consider a source S and a destination D using the Selective Repeat Protocol (SRP) with a window size of N=4N=4. Each packet is 10001000 bits. The delays are as follows: Each packet transmitted by S has a transmission time of 10 ms10ms. The end-to-end delay from the time that S starts transmitting a packet until D completely receives that packet is 100 ms100ms. Each ack transmitted by D has a transmission time of 1 ms1ms. The end-to-end delay from the time that D starts transmitting an ack until S completely receives that ack is 100 ms100ms. The timeout value is 300 ms300ms. Here is what happens to each packet: Packet #0 is received by D, and the corresponding ACK is received by S. The first transmission of packet #1 is dropped by a router in between S and D. The second transmission of packet #1 is received by D, and the corresponding ACK is received by S. The first transmission of packet #2 is dropped by a router in between S and D. The second transmission of packet #2 is received by D, and the corresponding ACK is received by S. Packet #3 is received by D, and the corresponding ACK is received by S. Packet #4 is received by D, and the corresponding ACK is received by S. Packet #5 is received by D, and the corresponding ACK is received by S. (a) At time t = 150 mst=150ms, what is S’s window? (b) At what time does the retransmission of packet #1 start? (c) At what time does the application layer at D receive packet #2? (d) What is the throughput during the time from t = 0 mst=0ms until t = 500 mst=500ms? Write your answers for parts (a)-(d) (as well as any diagram or equations use to obtain your answers) on paper, and upload the image here: For more information on Selective Repeat Protocol read this: https://en.wikipedia.org/wiki/Selective_Repeat_ARQ
So much stress and so little time? We’ve got you covered. Get your paper proofread, edited or written from scratch within the tight deadline.
With us, you are either satisfied 100% or you get your money back-No monkey business