Advanced Development and Engineering Design

Advanced Development and Engineering Design ORDER NOW FOR CUSTOMIZED AND ORIGINAL ESSAY PAPERS ON Advanced Development and Engineering Design Ch 10 Advanced Development Ch 12 Engineering Design Please answer one of the question on the file attached below: choose only 1 question from the file attached I want a replay for the discussion post below . (((( 6 type of external interfaces that will require critical attention in subway 1-Air monitoring and ventilation The confined space occupied by the underground subway system can accumulate the pollutants entering from the outside in addition to those generated within the system. Therefore, it is likely that the subway system in an area contains different types of hazardous pollutants. All underground installation is classified as gassy and requires enough ventilation to prevent accumulation of gases to an explosion level. Normal ventilation fans shall, even be designed for continuous operation 2- flood control In principle, there are many ways of mitigating flood risk in subway to reduce or avoid possible impact of flooding, such as building levees and tidal barriers. Several measures apply directly to underground transport systems. For example, cities can install backup power for pump systems to reduce or avoid the potential for infrastructure damage when power outages occur, and clear flooded tunnels more quickly. Similarly, flood gates and raised entrances at stations could allow the underground transport system to continue operations even during floods. Or by new technology includes subway “plugs”, which look and work like big balloons. They can inflate in just a few minutes to help prevent water from entering underground tunnels. When not in use, the plug packs down to a small storage space in the tunnel, ready for remote, immediate inflation in an emergency. But for all this useful engineering, we do have to realize that there is no feasible way to provide total flood prevention and there will always be some risk of flooding. That means we need to become more resilient to flooding when it does occur through prevention, preparation and planning. 3- Emergency protective, including evacuation plan In Subway construction we should be consider an area called a( safe stations ), in case of any emergency detected ,one of these stations will be the safest place in the subway .( mentioned in exercise English France tunnel) 4- fire prevention and protection Underground passenger station should be equipped with a fare collection system and a fare collection control system. Local station control and monitoring shall be at the station fare collection control unit, and remote monitoring/ patron registering shall be by a data transmission interface cabinet 5- Illumination by providing an atmosphere of relative comfort, pleasantness and cleanliness of surroundings, and a sense of personal safety and security. Lighting for passenger stations should be bright and cheerful, so all artwork illumination shall be approved by the architect. 6- The ground settlement during subway station construction in populous city areas is the most important factor that needs to be controlled )))))) Use this book only and i have the power point lecture recorded let me know if you need it. A. Kossiakoff W. Sweet, S. Seymour, and S. Biemer. Systems Engineering Principles and Practice, Second Edition, Wiley, 2011. ISBN: 978-0-470-40548-2 Please note i want answer to the question and i want a replay to the discussion post between parenthesis above separate the answer and the replay from each other . attachment_1 Get a 10 % discount on an order above $ 100 Use the following coupon code : NURSING10

Read more
Enjoy affordable prices and lifetime discounts
Use a coupon FIRST15 and enjoy expert help with any task at the most affordable price.
Order Now Order in Chat

Ensure originality, uphold integrity, and achieve excellence. Get FREE Turnitin AI Reports with every order.